Thursday,22-December-2016

Xantia: XU7JP4 - SL96 1.8 idle problem [fix]

EN
Problem:
- the car suddenly when stay somewhere at idle start rising to over 1200,or lowing below 800 the RPM`s with no reason
- most of that happen only when engine is warm
- the error what ECU log was: “mixture top position”. That registered with LEXIA
[Read More…]

Friday,30-September-2016

VDO Marelli Idle motor - test control

EN
Because I start to have some issues with my Xantia`s Idle motor decide to build something what can help me to move the valve piston IN and OUT and test it how it goes. In that way it will be easy to open and clean it, and of course to fit it back.
Used parts are:
[Read More…]

Tuesday,20-September-2016

Xantia MkII 1999 - Cabin blower problem[fix]

BG: Π½Π° Π±ΡŠΠ»Π³Π°Ρ€ΡΠΊΠΈ Π΅Π·ΠΈΠΊ ΠΌΠΎΠΆΠ΅Ρ‚Π΅ Π΄Π° ΠΏΡ€ΠΎΡ‡Π΅Ρ‚Π΅Ρ‚Π΅ Ρ‚ΡƒΠΊ: http://www.clubcitr … 193&start=1002
EN:
There are quite many topics in forums and etc, that give ideas or guides how to fix xantia blower problems. My case unfortunately wasn`t in any of that. Hope my story will be helpful to some of you.
First to clear one thing for the protocol - only if engine is working (alternator signal to the A/C ECU) you can have blower ON.
[Read More…]

Sunday,15-May-2016

Xantia Mk2 Instrument Panel Backlight Bluetooth controlled

BG Описано Π½Π° Π±ΡŠΠ»Π³Π°Ρ€ΡΠΊΠΈ: Ρ‚ΡƒΠΊ
EN Hi,
In that topic will try to describe one idea for my Xantia instrument cluster back-light, but it can be used/set to any other car or to be used for other project as well.
Parts been used : WS2812B LEDs , Arduino Nano, HC-06 serial(with board) and some small electronic elements.
But before start any proper description, let me say that all credits goes to: josh.com Without his clean and simple code that will be bad going project, or lets say with Adafruit library it come little overweight.

Electrical diagram is like that:[Read More…]

Saturday,31-October-2015

Xantia Mk II odometer

Hi there,
I have no idea if you`ve got to the point when your dash start loose the sane but here is some tip:
When you take the unit out and rip it apart in small corner of it you`ll find IC C46CM6. That is 1KB of memory, seems to be enough to keep the “books” of that odometer ecu. So, now getting your new dash you can de-solder the chip out from the original one, and solder it on the “new”.

odo1.jpg odo2.jpg

And ta-daaa - here is your kilometers back. But there is something else.
In that memory are stored some parameters for the fuel tank,fuel tank arrow and some that clue has only the developer of the unit. In that case I will offer you other road. Again remove it from the board and put it on programmer:

odo3.jpg

Once you get the content you`ll see: [Read More…]

Sunday,27-September-2015

Xantia XU7JP4 - 1.8 timing belt

EN There are many manuals how to replace that timing belt, but here wish to show my first time on Xantia
Engine is LFY XU7JP4 model 1999-2000 with tension pulley, which is semi automatic with indicator arrow.
belt0.jpg
! In my case the accessory belt pulley`s bolt(what is mounted on the crank) was really hard to release. I`ve need torque gun for it. Suggest to you to use sam, not try with wrench.
[Read More…]

Peugeot 406 / Xantia window buttons / Π±ΡƒΡ‚ΠΎΠ½ΠΈ Π΅Π» ΠΏΡ€ΠΎΠ·ΠΎΡ€Π΅Ρ†

ENBG
Do you have trouble sometimes with your Peugeot 406 electrical windows? Slow going up, or do not go at all? The reason is in the button contacts. Of course you can take the motor out, to clean and grease it. And also to take some care for the window rail to be smooth the movement. With small crew driver pull out the button. Then, carefully take out that gray cover and do not loose the pin. With small pliers take out the spring contact and with file or emery paper clean them. Then fit all in reverse order. Keep in mind that the passenger window power pass via driver`s side button. Take little time and clean all. Is much better. Имали Π»ΠΈ стС ΠΏΡ€ΠΎΠ±Π»Π΅ΠΌΠΈ с Π΅Π». ΠΏΡ€ΠΎΠ·ΠΎΡ€Ρ†ΠΈΡ‚Π΅ Π½Π° Π’Π°ΡˆΠ΅Ρ‚ΠΎ ПСТо 406? Π‘Π°Π²Π½ΠΎ ΠΈ ΠΌΡƒΠ΄Π½ΠΎ Π²Π΄ΠΈΠ³Π°Π½Π΅, ΠΈΠ»ΠΈ понякога Π΄ΠΎΡ€ΠΈ Π΄Π° ΠΎΡ‚ΠΊΠ°Π·Π²Π°Ρ‚. ΠŸΡ€ΠΈΡ‡ΠΈΠ½Π°Ρ‚Π° сС Π½Π°ΠΌΠΈΡ€Π° Π² ΠΏΠ°Ρ‚ΠΈΠ½Π°/Π½Π°Π³Π°Ρ€ ΠΏΠΎ ΠΊΠΎΠ½Ρ‚Π°ΠΊΡ‚ΠΈΡ‚Π΅ Π½Π° Π±ΡƒΡ‚ΠΎΠ½Ρ‡Π΅Ρ‚Π°Ρ‚Π°. Π‘ ΠΌΠ°Π»ΠΊΠ°/ΠΊΠΈ ΠΎΡ‚Π²Π΅Ρ€ΠΊΠΈ сС ΠΈΠ·Π²Π°ΠΆΠ΄Π°Ρ‚ Π±ΡƒΡ‚ΠΎΠ½Ρ‡Π΅Ρ‚Π°Ρ‚Π° ΠΈ Π²Π½ΠΈΠΌΠ°Ρ‚Π΅Π»Π½ΠΎ сС отваря сивото ΠΊΠ°ΠΏΠ°Ρ‡Π΅Π½Ρ†Π΅.ΠŸΡ€ΠΎΡΡ‚ΠΎ Π²Π½ΠΈΠΌΠ°Π²Π°ΠΉΡ‚Π΅ Π΄Π° Π½Π΅ Π·Π°Π³ΡƒΠ±ΠΈΡ‚Π΅ ΠΌΠ°Π»ΠΊΠΎΡ‚ΠΎ пластмасово "Ρ‡Π΅ΠΏΡ‡Π΅" ΠΊΠΎΠ΅Ρ‚ΠΎ Ρ€Π΅Π°Π»Π½ΠΎ натиска. Π‘ ΠΌΠ°Π»ΠΊΠΈ, подходящи ΠΊΠ»Π΅Ρ‰ΠΈΡ‡ΠΊΠΈ ΠΈΠ·Π²Π°ΠΆΠ΄Π°Ρ‚Π΅ ΠΏΠΎΠ΄Π²ΠΈΠΆΠ½Π°Ρ‚Π° пластинка ΠΈ с ΡˆΡ‚ΠΊΡƒΡ€ΠΊΠ°/ΠΏΠΈΠ»ΠΈΡ‡ΠΊΠ° зачистватС. Π‘Π»Π΅Π΄ Ρ‚ΠΎΠ²Π° сС сглабя ΠΏΠΎ ΠΎΠ±Ρ€Π°Ρ‚Π΅Π½ Ρ€Π΅Π΄. Ако ΠΆΠ΅Π»Π°Π΅Ρ‚Π΅ всС ΠΏΠ°ΠΊ, ΠΌΠΎΠΆΠ΅Ρ‚Π΅ ΠΈ Π΄Π° ΠΏΠΎΠ΄ΠΎΠ±Ρ€ΠΈΡ‚Π΅ Ρ€Π°Π±ΠΎΡ‚Π°Ρ‚Π° Π½Π° ΠΌΠΎΡ‚ΠΎΡ€Π° ΠΈ ΠΌΠ΅Ρ…Π°Π½ΠΈΠ·ΠΌΡŠΡ‚ Ρ‡Ρ€Π΅Π· почистванС ΠΈ смазванС. Π‘ΡŠΡ‰ΠΎ Ρ‚Π°ΠΊΠ°, ΠΈΠΌΠ°ΠΉΡ‚Π΅ ΠΏΡ€Π΅Π΄Π²ΠΈΠ΄ Ρ‡Π΅ Π·Π°Ρ…Ρ€Π°Π½Π²Π°Π½Π΅Ρ‚ΠΎ Π·Π° пасаТСрската ΠΏΡ€Π΅Π΄Π½Π° Π²Ρ€Π°Ρ‚Π° ΠΌΠΈΠ½Π°Π²Π° ΠΏΡ€Π΅Π· Π±ΡƒΡ‚ΠΎΠ½Π° Π½Π° ΡˆΠΎΡ„ΡŒΠΎΡ€ΡΠΊΠ°Ρ‚Π° Π²Ρ€Π°Ρ‚Π°.

jp1.jpg jp2.jpg
jp3.jpg jp4.jpg

Sunday,17-May-2015

Saxo Central Locking Addons

EN Hi folks, friend of mine has Saxo with central locking but unfortunately it doesn`t have any β€œblinking” or indication of the lock-unlock state. So he ask me if we can do something about it, and if I can add some addition small fade in and out light in front. For the blinking I use direction lights, for the other option - low beam lamps and PWM.Represented here by that small bulbs, first in the video. (that is my solution, if you check on ebay there are quite many central locking units with lot functions. So there you can get 4 button ones, and to add lights on with timer on button)
[Read More…]

Friday, 6-February-2015

Citroen Zx Gearbox replace

BG
KΠΎΠ»Π°Ρ‚Π° - ZX 1.4i `95 - Π·Π°Ρ€Π°Π΄ΠΈ ΡΠ²ΡŠΡ€ΡˆΠΈΠ»ΠΎ масло Π²ΡŠΡ‚Ρ€Π΅ Π² скоростната кутия станал ΠΌΠ°Ρ€ΠΌΠ°Π»Π°Π΄
ΠžΡ€ΠΈΠ³ΠΈΠ½Π°Π»Π½Π° кутия: Π½ΠΎΠΌΠ΅Ρ€ 0281 01 330070A
ΠžΡ‚ ΠΌΠΎΡ€Π³Π° куия: Π½ΠΎΠΌΠ΅Ρ€ 0281 01 330070B
Π’ΠΎΠ²Π° са Ρ€Π΅Ρ„Π΅Ρ€Π΅Π½Ρ‚Π½ΠΈΡ‚Π΅ Π½ΠΎΠΌΠ΅Ρ€Π° Π½Π° ситроСн ΡΡŠΡ€Π²ΠΈΠ·Π½Π°Ρ‚Π° страница. Π Π°Π·Π»ΠΈΠΊΠ°Ρ‚Π° Π±Π΅, Ρ‡Π΅ ΠΎΡ€ΠΈΠ³ΠΈΠ½Π°Π»Π½Π°Ρ‚Π° сС Ρ…Π²Π°Ρ‰Π°Ρ‰Π΅ с Π΅Π΄ΠΈΠ½ Π±ΠΎΠ»Ρ‚ ΠΏΠΎΠ²Π΅Ρ‡Π΅, Π° Π½ΠΎΠ²Π°Ρ‚Π° остана Π΅Π΄ΠΈΠ½ ΠΎΡ‚Π²ΠΎΡ€ ΠΏΠΎΠ²Π΅Ρ‡Π΅ извън ΠΊΠΎΠΆΡƒΠΊΠ° Π½Π° ΠΌΠΎΡ‚ΠΎΡ€Π°.
И Π΄Π²Π°Ρ‚Π° Π·Π΅Ρ‚ΠΊΠΎΠ²Π΅Ρ†Π°, стария ΠΈ новия, бяха ΠΏΠΎ 1.4 Π½ΠΎ Ρ‚ΠΎΠ·ΠΈ ΠΊΠΎΠΉΡ‚ΠΎ Π±Π΅ Π΄ΠΎΠ½ΠΎΡ€ Π½Π° кутия Π±Π΅ пълна инТСкция ΠΎΡ‚ 1997. Π”ΠΈΡ„Π΅Ρ€Π΅Π½Ρ†ΠΈΠ°Π»ΠΈΡ‚Π΅ ΠΊΠ°Ρ‚ΠΎ Π±Ρ€ΠΎΠΉ зъби - 14Ρ…60 - Π΅Π΄Π½Π°ΠΊΠ²ΠΈ, Π·ΡŠΠ±Π½ΠΈΡ‚Π΅ ΠΏΡ€Π΅Π΄Π°Π²ΠΊΠΈ Π½Π° Π΄Π°Ρ‚Ρ‡ΠΈΠΊΠ° Π·Π° Π΄Π²ΠΈΠΆΠ΅Π½ΠΈΠ΅ бяха 1:1 Π΅Π΄Π½ΠΈ ΠΈ ΡΡŠΡ‰ΠΈ
[Read More…]

Sunday,18-January-2015

Xantia II - audio update/s

EN
When I bought my Xantia few years ago, first thing I`ve done was to replace the head unit(old Sony) what previous owner used with Pioneer DEH-1500 and also the OEM speakers with Pioneer combined ones:
aud2.jpg
The unit choice was because the fact it has wire remote control. In other words - 3.5mm jack and easy way to connect your steering wheel sound control to it.
buttons-steering1.jpgbuttons-steering3.jpg
Replacing resistors on the OEM buttons and small mod on the tracks will give you chance to control your player. Even with that setup the car audio will be just fine.
Well, that was until this year. I decide to give little “boost” to the audio.
[Read More…]

  mail

Calendar

  • December 2020
    SunMonTueWedThuFriSat
     12345
    6789101112
    13141516171819
    20212223242526
    2728293031 

Admin area

Adds

3dultimatedesign.jpg