Saturday,28-April-2018

Sinumerik 840D Easy - Spiral out-in

EN
Have you get some times to the point, that you like to create nice finish top surface of some cylinder object?
Me to too, so I decide to share code how you can do that in Sinumerik 840D.
[Read More…]

Sunday,25-March-2018

Xantia Mk2 Ball-joints replacement

EN
Hello,
That is “my way”(without Sinatra), of changing them ball-joints. Just for the “fun”,there was also CV joint boot.
Probably you already saw in some youtube video, or in forum people using few meters arm and some belts to do the job. Well, that might also be home solution but for sure the torque gun do much better job and there is no need of converting the wheel hub into mummy.
[Read More…]

Friday,16-February-2018

3×74HC595 - arduino simple test

EN
parts: one arduino uno, 3 x 74HC595, 8 x RGB diodes with common ground pin, 8×220ohm resistors for the red pins, and 150ohms for the rest. Power supply: two 7805 regulators in parallel. Seems in that way do not overheat if all LEDs are on full power, 3×220uF caps, and one 47nF cap. 12V as supply.

the story: there was again some idea of car dash backlight and that was just test what can be created.
[Read More…]

Friday,19-January-2018

Activate Skoda Superb fog lights as cornering help light

EN
That is kind`a straight forward. Here it is(bit 7) :
skoda-cornering-light.jpg

Saturday, 6-January-2018

Ford Focus Mk2 1.6 diesel - won`t start [possible solution]

EN
Ford Focus Mk2 1.6 diesel - problem: that particular car start from time to time to produce that kind of state:

focus-mk-1.jpg
[Read More…]

Tuesday, 2-January-2018

част:34 - Финландия, през погледа на един габровец

Нова година във Финландия. Предполагам, засягал съм казуса “новогодишни празници” и преди както и за това как празнуват уважаемите. Мисля да обеля няколко портокала, пардон думи по този въпрос и сега, но първо малко относно магазинната част. Интересното през тази е, че за близо 8 години и горница преки наблюдения едва тази на 1-ви янувари ще има отворени магазини. Какво пък толкова е интересното ще попитате? То у нас..
[Read More…]

Sunday,17-December-2017

Audi 80 Car sound project

EN
Time to set some sound in one ancient vehicle produced by the Germans - Audi 80.
The project get some time and as final result can be described as.. working well
[Read More…]

Saturday, 2-December-2017

MG995 and SG90 Servo 3D models

EN
As images show, that are 3D models of full set MG995 / SG90 servo. If you can use STL or IGS files, feel free to download:

mg995-render.jpg

download MG995 Servo 3D models.

sg90-asembly.jpg

download SG90 Servo 3D models

Inside are as separate files for all parts shown on the picture. Enjoy!

Saturday,28-October-2017

custom power supply from PSU

EN
That is my version over the PSU to custom power supply theme. Found some old 350W “junk”, bought some cable ends and 4mm standard female banana connectors and here we go.
[Read More…]

Saturday,30-September-2017

Ford Fiesta : driver`s door lock fix

EN
Hi there,
In one of this days I drop on to small problem with one fiesta. To be more specific year 2001, driver`s door.
The problem: if you keep the central lock fuse on place door motors run into lock..unlock..lock..unlock mode without stopping. As additional bonus lock barrel do not rotate smooth on both sides. Doh! What I have done? Here:
[Read More…]